lookimeme.blogg.se - Solidworks print to scale multiple pages

Window - Prints the portion of the drawing contained in the specified window, maintaining the aspect ratio of the windowed area to the drawing.(Available for drawings that have saved views.) View - Prints the selected saved view.Layout - Prints to the edge of the layout.Limits - Prints to the limits defined for the drawing.

Ğxtents - Prints the area that contains entities in the drawing.

ĝisplay - Prints the view on the screen.

To specify a portion of the drawing to printġĜlick the Layout tab or Model tab for which you want to specify the area to print.Ĥ In What to Print, click one of the following:

Type the ratio of printed units of measure (inches or millimeters) to drawing units.ĥ To specify the printed units of measure, choose Inches or Millimeters.

For more details, see Customizing the scales list. The list of available scales is set up using the Scales List command. For example, choose 1:2 if you want 1 printed unit (inch or millimeter) to equal 2 drawing units.

Select a pre-defined scale in the Scale list.

On the Format toolbar, click the Page Setup Manager tool.ģ Select the desired page setup, then click Modify.Ĥ In Print Scale, select Fit to Paper to scale the drawing to fit on one printed page.ġĜlick the Layout tab or Model tab for which you want to specify the scale factor.Ĥ In Print Scale, do one of the following:.

On the menu, choose File > Page Setup Manager.

On the ribbon, choose the Application button then choose Page Setup Manager, or choose Output > Page Setup Manager (in Plot).

To automatically scale the drawing for printingġĜlick the Layout tab or Model tab for which you want to set to scale automatically.Ģĝo one of the following to choose Page Setup Manager ( ):

If you are printing from a Layout tab, the scale and view options you specify can be different for each layout that you create. To print the drawing at a specific scale, specify the scale as a ratio of drawing units to printed units. When you print the drawing, you can specify the scale of the resulting print or let the program adjust the size of the drawing to fit the paper. When you create a drawing, you generally draw entities full-size.

You can specify a different origin, however, by specifying different coordinates. The origin is normally set to 0,0, which places the lower left corner of the print area as close to the lower left corner of the paper as the printer or plotter will allow. You can control the position of the drawing on the paper by specifying the origin of the print area, the location of the lower left corner of the print area, in relation to the lower left corner of the paper. You can choose to print what is visible on the screen, or you can specify to print an area of the drawing. Then select Window > Tile Horizontally (or vertically if you prefer).You can print or plot the entire drawing or a selected portion of a drawing.If I want to combine multiple drawings into a single drawing file with multiple sheets: Afterwards, I just open each drawing file and delete the unneeded sheets.Repeat as required for additional sheets.Then save the drawing with a new name (this will be the name of the.To summarize for those of you unable to view the video… If I have a multi-sheet drawing and want to save the sheets as separate drawings: Not to worry with SOLIDWORKS, you can switch back and forth quite easily. Both methods are acceptable practice, so on rare occasions you may find yourself in a position where you need to switch from one method to the other. Other companies prefer to have a single drawing file for each part. Some companies like to have one drawing file with multiple sheets, where each sheet contains the detail drawings of each part.